TRUST 735S POWERC@M ZOOM
33
U K
The video clip is
out of focus.
The distance to the subject
is too small.
Increase the distance to the
object to be videoed or
select the macro setting
(see chapter 6.3).
The video is
shaky.
The camera records 10
images per second. This is
less than a camcorder.
Move the camera slowly or
use a stand. The recordings
will then be more stable.
The webcam
image is not clear.
A low resolution is used.
Set the video resolution to
320 x 200 (see chapter
7.1.4).
13.1.2
Problems with the computer
Problem
Cause
Possible solution
The computer's USB port
does not work.
Check the settings of your
USB port. For more
information, see
www.trust.com/customercar
e/help/usb.
The camera has not been
connected to a USB port.
Connect the camera to a
USB port
Windows does not
detect a new
device after
connecting the
camera.
The camera has been
connected to a USB hub
which does not have a
power supply.
Connect the camera to a
USB hub which has a power
supply or to a USB port on
your computer.
The camera has not been
connected to a USB port.
Connect the camera to a
USB port
The error message
‘Capture device
was not detected’
is displayed.
The camera has been
connected to a USB hub
which does not have a
power supply.
Connect the camera to a
USB hub which has a power
supply or to a USB port on
your computer.
The drivers have not been
installed correctly.
Install the drivers before
connecting the camera.
The camera is
marked with an
exclamation mark
‘!’ in the Device
Manager.
The USB port does not work
correctly.
Test the USB port using a
different device or see the
USB troubleshooter at
www.trust.com.
There is no
connection with
the computer.
The camera has been
connected incorrectly.
Reconnect the cables
