TRUST 500F SPYC@M FLASH
3
U K
Instructions when using for the first time
Chapter
1.
Inserting the batteries
(3)
2. Taking
photographs
(5)
3.
Installing the driver
(6.2)
4.
Connecting the camera
(6.3)
5. Loading
photographs
(8.1)
1 Introduction
This instruction manual is for users of the TRUST 500F SPYC@M FLASH. This
camera is suitable for making a maximum of 160 recordings. The camera has a 16
MB = 128 Mbit internal flash memory, webcam function, video function, automatic
exposure, lens with a fixed focal length, an extra macro option and a flash function.
2 Safety
2.1 General
information
Carefully read the following instructions before use:
-
The TRUST 500F SPYC@M FLASH does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
-
Do not use aggressive substances, such as petrol or white spirit, to clean the
device. These may harm the material.
-
Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
-
Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking
over it.
-
Do not repair this device yourself.
2.2 Batteries
1.
The alkaline batteries supplied are not rechargeable. Do not try to recharge
them, because this may cause them to explode.
2.
Never throw the batteries onto an open fire. The batteries may explode.
3.
Never drill holes into the batteries.
4.
Keep the batteries out of the reach of small children.
5.
Only use AA alkaline or rechargeable AA NiMh/1600 mA batteries with this
camera.
6.
When the batteries are empty, ask your local authority where you can
dispose of them.
Note:
Do not use old and new batteries at the same time, because the old
batteries may deplete the new ones.
Note:
The batteries should be removed if the camera is not going to be used
for some time. This will save the battery capacity.
!
