Trust 500F SPYC@M FLASH User Manual Download Page 23

Page: 23 / 25

TRUST 500F SPYC@M FLASH

U K

Problem

Cause

Possible solution

The camera is
connected to a USB
hub which does not
have a power supply.

Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.

The camera is not
connected to the USB
port.

Connect the camera to a USB port.

Error message
‘Capture device
was not detected’
is displayed.

The camera is
connected to a USB
hub which does not
have a power supply.

Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.

The camera is
connected to a USB
hub which does not
have a power supply.

Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.

The TRUST 500F
SPYC@M FLASH
is marked with an
exclamation mark
‘!’ in the ‘Device
Manager’.

The camera has an
IRQ conflict with a
different device in
your computer.

Make IRQ addresses free. Also
see:
www.trust.com/customercare/help/
general

The TRUST 500F
SPYC@M FLASH
does not work in
combination with
the TV/capture
card.

There is a conflict
between the camera
and the TV card.

Carry out the following:
1) Remove the TV Capture card.
2) Install the 500F SPYC@M
FLASH.
3) Install the TV capture card.

The batteries have
been inserted
incorrectly.

Reinsert the batteries (see chapter
3).

The camera is turned
off or is in the sleep
setting.

Turn the camera on or take it out of
the sleep setting by pressing the
‘Mode’ button for a couple of
seconds.

The camera does
not do anything.

The batteries are
empty.

Replace the batteries (see chapter
3).

The camera does
not react,
although the
batteries are full.

The camera must be
reset.

Remove the USB cable and the
batteries for at least 1 minute to
reset the camera. Reinsert the
batteries into the camera. The
camera should now work.

NiCd batteries are
used.

Use alkaline batteries (Duracell
Ultra are recommended) or
rechargeable NiMH batteries.

The camera is in the
‘Standby’ setting.

Turn the camera back on by
pressing the ‘Mode’ button for a
couple of seconds.

The camera
suddenly turns
itself off.

The power in the
batteries is low.

Replace the batteries.

The battery
indicator on the
display flashes.

The batteries are
empty.

Replace the batteries.

Summary of Contents for 500F SPYC@M FLASH


























Search results

Summary of Contents for 500F SPYC@M FLASH

Reviews:

Related manuals for 500F SPYC@M FLASH

Brands by name

Popular brands

Trust 500F SPYC@M FLASH, User Manual

Search results

Summary of Contents for 500F SPYC@M FLASH

Reviews:

Related manuals for 500F SPYC@M FLASH

Brands by name

Popular brands