Triumph 2010 Tiger 800, Service Manual

Page: 481 / 508

Instrument Pack
Removal
1. Remove the rider's seat (see page
1 6-13).
2. Disconnect the battery, negative (black> lead first.
3. Remove the windscreen (see page
16-19).
4. Remove the two fixings and remove the screen
upper bracket.
CQXi -
1.
Upper screen bracket
2.
Fixings
5. Remove the cover attached to the rear of the
instruments.
Note:
•
The cover is held in place by a bayonet type
fixing. Gently pull on the cover to release it.
6. Disconnect the electrical con nector from the
instruments.
Electrical
Z
Remove the screw and release the instrument pack
from the bracket bayonet fixings.
2. Bayonet fixings
3. Electrical connector
Installation
1. Position the instrument pack to the bracket.
2. Insert the bayonet fixings into the grommets.
3. Refit the fixing and tighten to
2 Nm.
4.
Connect the instruments to the harness.
2.
Bayonet fixings
3. Electrical connector
5. Install the cover and gasket to the rear of the
instruments, ensuring the bayonet fixing is fully
inserted in the grommets on the instrument bracket.
6.
Refit the screen upper bracket and tighten the· two
fixings to
3 Nm.
Z
Refit the windscreen <see page
1 6-21).
8. Reconnect the battery, positive (red) lead first.
9. Refit the rider's seat (see page
16-13).
SeNice Manual
-
Tiger 800 and Tiger 800XC
17.13