Triumph 2010 Tiger 800, Service Manual

Page: 103 / 508

Z Lock the inner and outer drums together using
service tool T3880306. Depress the rear brake pedal
to prevent the engine from turning, and tighten the
clutch centre nut to
98
Nm.
Remove the service
tool.
8. Using a suitable pin punch, stake the nut to the shaft.
1. Service tool T3880306
9. Disengage second gear and check for free
rotation of the clutch inner drum.
10. Coat all clutch friction plates in clean engine oil
before fitting the friction plates, steel plates,
anti-judder spring and anti-judder seat washer to the
clutch basket in the same order and orientation as
noted during removal.
Note:
•
The inner and outermost friction plates are
different to the remainder and are also
different to each other. They must be fitted
in their no
t
ed positions.
Clutch
•
The three outer steel plates may be
different to the other plates, depending on
the clutch pack height settings used during
manufacture <see page
4-8).
They must be
fitted in their noted positions.
1. Steel plate
2. Inner fiction plate
3. Anti-judder spring
4. Anti-judder seat washer
5. Clutch inner drum
SeiVice Manual
-
Tiger 800 and Tiger 800XC
4.11