Triumph 2010 Tiger 800, Service Manual

Page: 479 / 508

Relays
The relay pack is located beneath the rider's seat, adjacent
to the fuse boxes. To gain access to the relays, remove the
rider's seat (see page
16-13).
Relay Identification
cgzj
1. Cooling fan relay
2.
Engine management system <EMS> main relay
3. Starter relay
4. Fuel pump relay
5. Headlamp relay
Direction Indicator Unit
The direction indicator unit is located below the rear rack,
adjacent to the rear light unit. To gain access to the relays,
remove the rear rack <see page
16-20).
Electrical
Fuses
If a fuse fails during operation, inspect the electrical
system to determine the cause, and then replace it with a
new fuse of the correct current rating.
A blown fuse is indicated when all of the systems
protected by that fuse become inoperative. When
checking for a blown fuse, use the table below to establish
which fuse has blown.
Note:
• The starter solenoid has an additional 3 0
Amp fuse attached directly to the solenoid,
beneath the rider's seat.
I ,
Always replace blown fuses with new - ones of the correct
current rating <as specified on the fuse box cover) and
never use a fuse of higher rating.
Use of an incorrect fuse could lead to an electrical
problem, resulting in motorcycle damage, loss of
motorcycle control and an accident.
Fuse Identification
The fuse boxes are located beneath the rider's seat.
To allow access to the fuse boxes, the rider's seat must be
removed (see page
16-13).
2.
Rear fuse box
SeiVice Manual
-
Tiger 800 and Tiger 800XC
17.11