Triumph 2010 Tiger 800, Service Manual

Page: 405 / 508

Diagnostic Trouble Codes
Dependant on the DTC stored, the AB$ ECM will act in one of two ways:
a) Inhibit ABS operation immediately, irrespective of the ABS operating mode;
or
b) Allow the ABS operation to complete before inhibiting the ABS.
Once the ABS ECM has inhibited ABS function, the ECM will act in one of three ways:
a> Allow the ABS to resume operation if the fault clears;
or
b) Allow ABS operation after an ignition cycle if the fault clears;
or
c)
Inhibit the ABS function until the fault is rectified and the DTC erased.
Brakes
The AB$ system will act on the DTC stored according to the tables on the following pages:
Fault Description ABS warning ABS ABS continues ABS will resume operation
light operation is to operate if fault clears
illuminated inhibited when fault is
when fault is when fault is logged
logged logged
<Only
when
ABS is Active.
When ABS is no
longer active,
operation is
inhibited)
Front Wheel Sensor Open Yes
Yes
No
Circuit/Short Circuit
Front Wheel Sensor Abnormal Yes Yes Yes
Yes, if after ignition cycle, no
Input/Losing Contact fault is detected. DTC o
r
emains
stored
Rear Wheel Sensor Open Yes
Yes
No
Circuit/Short Circuit
Rear Wheel Sensor Abnormal Yes Yes Yes
Yes, if after ignition cycle, no
Input/Losing Contact
fault is detected. DTC remains
stored
Front Wheel Pulser Gear Yes Yes
Yes, if after ignition cycle, no
Missing Teeth
fault is detected for 1 second
and speed exceeds 30 km/h.
DTC remains stored
Rear Wheel Puis er Gear Yes Yes Yes, if after ignition cycle, no
Missing Teeth
fault is detected for 1 second
and speed exceeds 30 km/h.
DTC remains stored
Front Wheel Input Solenoid Yes
Yes
No
Open/Short Circuit
Front Wheel Output Solenoid Yes Yes No
Open/Short Circuit
Service Manual
-
Tiger 800 and' Tiger SOOXC
14.51