manualshive.com logo in svg

Triumph 2010 Tiger 800, Service Manual

The Triumph 2010 Tiger 800 Service Manual is a comprehensive guide for maintaining and repairing your motorcycle. You can download this manual for free from manualshive.com, ensuring you have the necessary information to keep your bike in top condition. Don't miss out on this essential resource for all Tiger 800 owners.

Share
Download
background image

8 

Lubrication 

Table of Contents 

Exploded  View - Sump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 2 

Exploded  View - Oil  Pump/Water  Pump, Gears  and  Heat  Exchanger .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 3 

Engine Oil Circuit  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 4 

Engine Oil Circuit Description  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8.5 

Heat Exchanger .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8.5 

Engine Oil  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 6 

Specification  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 6 

Triumph  Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

·. 

.  .  .  .  .  .  .  . 

8. 6 

Oil  Level  Inspection 

. . . . . . . . . . . . . . . . . . . . . . . . . .  :·. 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 6 

Oil  and  Oil  Filter Change .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 7 

Disposal  of Used  Engine Oil .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 8 

Oil  Pump  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 8 

Removal  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 8 

Inspection  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 1 1  

Assembly.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 12 

Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 13 

Low  Oil  Pressure Warning  Light Switch .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 14 

Removal  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 14 
Installation.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 14 

Sump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

8. 15 

Removal 

. 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 15 

Installation. .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 16 

Heat  Exchanger .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8. 17 

Removal  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 17 
Inspection  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 17 
Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8. 18 

SeNice Manual 

-

Tiger 800  and  Tiger 800XC 

8.1 

Summary of Contents for 2010 Tiger 800





























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Tiger 800

ZARD ZUMA Fitting Manual preview
ZUMA
Brand: ZARD Pages: 2
SSR Motorsports SR250S Owner'S Manual preview
SR250S
Brand: SSR Motorsports Pages: 39
yasuni CARRERA 30 Assembly Instructions Manual preview
CARRERA 30
Brand: yasuni Pages: 8
Memphis Shades MEB8975 Mounting Instructions preview
MEB8975
Brand: Memphis Shades Pages: 2
GAS GAS 2003 FSE Parts List preview
2003 FSE
Brand: GAS GAS Pages: 26
SRC B-TRK502-01-01-SL Quick Start Manual preview
B-TRK502-01-01-SL
Brand: SRC Pages: 5
Ecomobility Green World LIPO45 User Manual preview
LIPO45
Brand: Ecomobility Green World Pages: 24
CZ Sport 1 180 - 487.3 Workshop Manual preview
Sport 1 180 - 487.3
Brand: CZ Pages: 42
EMB Lectra VR24 1998 Owner'S Manual preview
Lectra VR24 1998
Brand: EMB Pages: 58
Saddlemen E-PAK User'S Manual & Installation Instructions preview
E-PAK
Brand: Saddlemen Pages: 2
Wunderlich 8160952 Fitting Instructions preview
8160952
Brand: Wunderlich Pages: 2
Wunderlich 25440 Series Fitting Instructions preview
25440 Series
Brand: Wunderlich Pages: 2
Wunderlich 30940 Fitting Instruction preview
30940
Brand: Wunderlich Pages: 3
Wunderlich 20571 Series Manual preview
20571 Series
Brand: Wunderlich Pages: 3
Wunderkind Custom littleOne BMR18T Installation Manuals And Safety Information preview
littleOne BMR18T
Brand: Wunderkind Custom Pages: 4
Wunderlich 8600888 Fitting Instructions preview
8600888
Brand: Wunderlich Pages: 4
Bagster AP3079 Fitting Instructions preview
AP3079
Brand: Bagster Pages: 2
hepco & becker 661992 01 05 Mounting Instructions preview
661992 01 05
Brand: hepco & becker Pages: 4

Brands by name

Popular brands

Load more brands