Triumph Adler DC 2242 Instruction Handbook Manual Download

Page: 185 / 424

Sending Functions

OPERATION GUIDE

5-27

WSD Scan

WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.

NOTE:

To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-

connected, and

WSD Scan Setup (page 8-68)

is set to

in the network settings. For information on operating

the computer, refer to the computer’s help or the operation guide of your software.

Installing Driver Software (for Windows Vista)

Click

Start

and then

Network

in the computer.

Right-click the machine’s icon (

XXX:XXX) and then click

Install

NOTE:

If the

User Account Control

window appears,

click

Continue

If the

Found New Hardware

window appears, click

Cancel

During the installation, double-click the icon shown
on the task bar to display the

Driver Software

Installation

screen. When

Your devices are

ready to use

is displayed on the

Driver Software

Installation

screen, the installation is completed.

Procedure Using this machine

Press the

Send

Key.

Displays the screen for sending.

NOTE:

Depending on the settings, the address book

screen may appear. In this event, press [Cancel] to
display the screen for sending.

Place the originals in the document processor or on
the platen.

Press [WSD Scan].

Press [From Operation Panel] and press [Next].

Summary of Contents for DC 2242









































































































































































































































































































































































































































Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands

Triumph Adler DC 2242, Instruction Handbook Manual

Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands