Triumph Adler DC 2242 Instruction Handbook Manual Download

Page: 184 / 424

Sending Functions

5-26

OPERATION GUIDE

Enter E-mail Subject and Body

When sending E-mail, enter the subject and body of the
E-mail.

Use the procedure below to enter the subject and body
for an E-mail message and then send the E-mail.

Press the

Send

key.

Press [Advanced Setup] and then [E-mail Subject/
Body].

Press [Subject].

Enter the subject, and press [OK].

NOTE:

Up to 60 characters can be entered for the

subject.

Press [Body].

Enter the body and press [OK].

NOTE:

Up to 500 characters can be entered for the

body.

Press [OK].

Specify the destination, and press the

Start

key to

start sending.

Subject

Body

E-mail Subject/Body

Cancel

Add Shortcut

Status

08/08/2009 10:10

Preview

Original
Zoom
Paper

100%
---

:
:
:

---

Place original.

Ready to send.

Destination

Summary of Contents for DC 2242









































































































































































































































































































































































































































Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands

Triumph Adler DC 2242, Instruction Handbook Manual

Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands