Triumph Adler DC 2242, Instruction Handbook Manual

Page: 88 / 424

Basic Operation
3-18 OPERATION GUIDE
Use the procedure below to produce stapled copies.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Staple/
Punch].
4
Select the staple position.
NOTE:
To use saddle stitching, press [Bind and Fold].
When placing originals, be sure to place the cover
page at the bottom. For more information on saddle
stitching, refer to
Booklet from Sheets on page 4-19 .
5
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6
Press [OK].
7
Press the Start key. Copying begins.
Built-in Finisher
Cassette Paper Load
Direction
Built-in Finisher
Cassette Paper Load
Direction
Original Orientation:
Top Edge (Back Edge)
Original Orientation:
Top Edge (Back Edge)
Original Orientation:
Left Top Edge (Left top
corner)
Original Orientation:
Left Top Edge (Left top
corner)
Staple/Punch
Top
Right
Staple
Top
Left 2 staples
Top
2 staples
Right
Ready to copy. Copies
Status 08/08/2009 10:10
Cancel OK Add Shortcut
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.
Top Edge Top
Original
Orientation
Punch
Off
Off
Bind
and Fold 2 staples
Left
2 holes
Top
2 holes
Left 3 holes
Left
3 holes
Top
3 holes
Right 2 holes
Right