Triumph Adler DC 2242 Instruction Handbook Manual Download

Page: 288 / 424

Default Setting (System Menu)

8-58

OPERATION GUIDE

Internet Browser Setup

This procedure sets up the Internet browser application. You can specify the following Internet browser settings.

• Internet Browser Setting
• Browser Preferences
• Proxy Settings

Internet Browser Setting

This selects whether or not the Internet browser is used.

Use the procedure below to specify the Internet browser setting.

Press the

System Menu

key.

Press [ ] and then [Internet].

NOTE:

If user login administration is disabled, the user authentication screen appears. Enter your login user

name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to

Adding a User on page 11-5

for the default login user name and password.

Press [Change] of

Internet Browser

Press [On] or [Off].

Press [OK].

Browser Preferences

This specifies Internet browser preferences such as your home page setting and how pages are displayed.

NOTE:

This is not displayed if you selected

Off

Internet Browser Setting

(page 8-58)

Use the procedure below to set your Internet browser preferences.

Press the

System Menu

key.

Press [ ] and then [Internet].

NOTE:

If user login administration is disabled, the user authentication screen appears. Enter your login user

name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to

Adding a User on page 11-5

for the default login user name and password.

Press [Next] of

Browser Environment

Summary of Contents for DC 2242









































































































































































































































































































































































































































Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands

Triumph Adler DC 2242, Instruction Handbook Manual

Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands