Triumph Adler DC 2242 Page 290 Instruction Handbook Manual Download

Page: 290 / 424

Default Setting (System Menu)

8-60

OPERATION GUIDE

Applications

You can install and use applications that will make your day-to-day use of this machine more efficient.

Installing Applications

You can install new applications.

Use the procedure below to install an application.

Insert the USB memory containing the application to be installed into the USB memory slot (A1).

NOTE:

Removable Memory is recognized. Displaying files.

appears, press [No].

Press the

System Menu

key.

Press [ ] and then [Application].

NOTE:

If user login administration is disabled, the user authentication screen appears. Enter your login user

name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to

Adding a User on page 11-5

for the default login user name and password.

Press [Add].

Select the application to be installed and press [Install].

You can view detailed information on the selected application by pressing [Detail].

When the confirmation screen appears, press [Yes].

Installation of the application begins. Depending on the application being installed, the installation may take
some time.

Once the installation ends, the original screen reappears.

To install another application, repeat steps 5 to 6.

To remove the USB memory, press [Remove Memory] and wait until the

Removable Memory can be safely

removed

message appears. Then remove the USB memory.

Activating/Deactivating Application

To use an application, set the application to

Activate

Use the procedure below to start using an application.

Press the

System Menu

key.

Summary of Contents for DC 2242









































































































































































































































































































































































































































Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands

Triumph Adler DC 2242, Instruction Handbook Manual

Search results

Summary of Contents for DC 2242

Reviews:

Related manuals for DC 2242

Brands by name

Popular brands