Triumph Adler DC 2242, Instruction Handbook Manual

Page: 254 / 424

Default Setting (System Menu)
8-24 OPERATION GUIDE
Use the procedure below to set the default Repeat Copy setting.
1
Press the System Menu key.
2
Press [Common Settings], [ ] and [Next] of Function Defaults . Press [ ] twice and [Change] of Repeat
Copy .
3
Select the default for [Off] or [On].
4
Press [OK].
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
NOTE:
Refer to page 3-13 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [ ], [Next] of Function Defaults . Press [ ] twice and [Change] of Collate/Offset .
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings.
Item Description
Collate Off Collate not performed.
On Collate performed.
Offset Off Offset not performed.
Each Set
(Each Page) Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)
Item Description
Fit to Paper Size Fit the image size to the selected paper size.
Image Resolution Print at resolution of the actual image.
Fit to Print Resolution Fit the image size to the print resolution.