31
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
Model TRI93-50-02 - DC and AC charging
Specifications
The following information is particular
to model
TRI93-50-02, 50kW DC+AC
(worldwide excluding USA).
Wiring Size
If your Veefil is configured for simulta-
neous DC and AC charging then use the
following:
3ø: 50mm
2
Use 90°C Copper Wire
If your Veefil is configured for only one
plug charging at any one time then use
the following:
3ø: 25mm
2
Use 90°C Copper Wire
Take care to observe local regulations
regarding wiring different circuits in the
same conduit, including the ethernet link
if used. In general all conductors occupy-
ing the same conduit shall have an insula
-
tion rating equal to at least the maximum
circuit voltage applied to any conductor
within the conduit.
Required equipment
Lifting apparatus
Crate and charger weigh 230kg, the Veefil
fast charger alone weighs 205kg. Ensure
lifting apparatus is sufficiently rated.
Conduit
63mm flexible conduit
Supply current
:
If your Veefil is configured for simulta-
neous DC and AC charging then use the
following:
150A
If your Veefil is configured for only one
plug charging at any one time then use
the following:
80A
Smaller cable ratings can be used if the
software is configured to limit the power
draw.
Communications
3G network capability or Ethernet.
Ethernet cable
(if required)
Use 20mm flexible conduit.
