21
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
8. Fit the rear radiator panel
Replace the rear radiator panel ensuring
the conduit is fitted securely within this
exit area.
If there are more than two conduit hoses
(possible Ethernet cable in conduit) place
the largest at the base with the smaller
feeding above.
7. Trim the rear radiator panel
The rear radiator panel provides the
exit point for the conduit from the Veefil.
Cut the three tabs on the lower right
hand of the radiator panel to remove the
material to open the conduit exit point.
TAB 1
TAB 2
TAB 3
Fix to ground and feed power
