17
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
5. Remove radiator
Unsrew the 4x nuts to remove the radia-
tor. Slide the radiator off the fasteners,
and sit the radiator on the base plate.
Reach behind and unclip the four way
connector and cooling hoses to disen
-
gage.
The four way connector is the left hand
plug attached to the underside of the
unit. Squeeze front clip and pull down to
release.
Unclip the 2x quick release cooling hoses
which are behind the radiator to com-
pletely disengage the radiator from the
unit. Store in a safe place ensuring no
damage to cooling hoses for later
re-assembly.
3. Remove front and rear radiator
panels
Unscrew the 4x security screws and
remove them and the washers from both
radiator panels using the 5mm Pin Hex
bit. Pull the radiator panels away from the
metalwork frame to remove.
4. Remove shipping bolts
Unscrew the 4x bolts from the shipping
base to disengage.
If your installation supplies power from
above the ground, proceed to pg 17.
If your installation supplies power from
an underground foundation remove the
radiator.
Unpacking & installation preparation
