29
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
which will charge your battery to 80%
of its capacity. Pressing the MAX/HALF
button changes this setting to HALF which
sets the charge to 50% of battery capac-
ity. Pushing this button toggles between
MAX/HALF.
When you have made your selection
press START to begin your charging
session.
4. Charging
MIN
kWh
%
STOP
MAX
50%
START
SMS
APP
The CHARGING icon is highlighted and
the numerical display will show active
charging information. The STOP button
will also be highlighted.
There is a 10 second window where
pressing STOP will end the session. After
this 10 second window, the interface will
lock to protect your charging session and
the LOCK and ACTIVATION icons will be
highlighted.
MIN
kWh
%
STOP
MAX
50%
START
SMS
APP
Should you wish to interrupt your
charging session, touch your card to the
ACTIVATION icon to unlock the interface,
and press STOP. The APP or SMS may
also have this functionality.
2. Activation
MIN
kWh
%
STOP
MAX
50%
START
SMS
APP
At this stage the ACTIVATION icon and
the STOP button will be highlighted.
Touch your access card to the ACTIVA-
TION icon for about 3 seconds or use
your APP or SMS. You will hear a repeat-
ing ‘pip’ sound whilst authenticating and
the icon will flash rapidly. Once authen-
ticated, the CHARGE SELECTION will be
enabled.
A charging fee may also be displayed at
this stage if appropriate.
If authentication fails, a 3 second beep
will be heard and the Veefil will proceed
to RETURN PLUG TO CHARGER.
If no action is taken within three minutes
the plug will unlock from the car. The
STOP icon is highlighted during this time
to allow you to unlock the plug if re-
quired. If STOP is pressed the Veefil will
proceed to RETURN PLUG TO CHARGER.
3. Charge selection
MIN
kWh
%
STOP
MAX
50%
START
SMS
APP
MAX
MAX
50%
50%
The Veefil is automatically set to MAX
Operating Instructions
Operating Instructions
