26
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
Fasten with black washers and security
screws using the 5mm Pin Hex bit.
Do not over tighten.
6. Re-attach front panel wiring
If required, there are three points to
re-connect:
1. Wiring to the top rear panel.
Plug in connector.
2. Earthing strap.
Replace the earthing strap fasteners in
the following order: Star washer, lug at-
tached to earthing strap, spring washer,
and fasten to the metalwork with the bolt.
3. Connector ‘B’ on the HMI panel.
Plug in Connector ‘B’.
1
2
3
7. Attach front panel
Gently place the front panel on the top
hook ensuring the panel sits outside the
fastening brackets. Sit on the radiator
panel and check the top hook is engaged.
It will hold in position. Secure with the ny-
lon washers and security screws ensuring
the plastic holes line up with the bracket
nutserts. Do not over tighten.
The Veefil fast charger is now ready for
operation.
Closing checklist
