Trinnov Audio ALTITUDE 16, User Manual

Page: 99 / 164

99
Altitude
16
_ USER MANUAL
6.8.1 _OVERVIEW OF THE CROSSOVER SETUP PROCEDURE
Figure 73: Set the type of calibration for the crossover
When performing the Wizard Setup you will have three propositions to calibrate the crossovers:
Active filters auto calibration: the crossovers will be automatically calibrated. This will automatically deter-
mine the level, delay and polarity of each driver. The filters applied in the 3D view of the Wizard will be take
in account.
Active filters manual calibration: only for experts, allow the possibility to change what the Optimizer has
determined after the calibration, by manually adjust levels, delays and polarities of each driver. The filters
applied in the 3D view of the Wizard will be take in account but you can manually change them.
No calibration: jump direcly to the next step without modifying the delay or the level of the crossovers (set
at 0). The filters applied in the 3D view of the Wizard will be take in account.
When you calibrate a crossover you will probably have to increase the volume. Effectively, as the MLS signal is split
to 2, 3 or 4 ways, it will lose in strength.
Once the procedure chosen, click on Next.