Trinnov Audio ALTITUDE 16, User Manual

Page: 50 / 164

50
5 _BASIC SETTINGS
5.1 _NAMING YOUR SOURCES
The Altitude
16
provides very flexible Source Configurations . Each Source Configuration can be renamed
to reflect the actual source to which it corresponds. By default, the source names correspond to the names
of the back panel connectors but can be edited in the Home/Sources Config page of the Advanced Set-
tings Interface.
A Source Configuration can also include specific output and processing parameters. Therefore, it can be
used to switch between outputs or between different processing settings. For example, it is possible to
configure two Source Configurations set on the same inputs connectors but set with different names to
recall different settings.
The Home/Source Config page consists of one vertical tab per source on the left and source-specific
parameters on the right.
Figure 35: Source Configurations panel
!
IMPORTANT NOTE: It is particularly important to define user friendly names for the first four sources because they are displayed on the front
panel screen, and can be recalled from the front panel or from the IR remote control source selection buttons.
!
IMPORTANT NOTE: Changes are not applied until saved via the Save button in the bottom right corner of the screen.
Use this button to go back
to the Main screen
Click on the Save button
to save new settings
Click on the Reload button to restore
the previously saved settings