Trinnov Audio ALTITUDE 16, User Manual

Page: 51 / 164

51
Altitude
16
_ USER MANUAL
5.2 _CONFIGURING YOUR SOURCES
In addition to an editable name, each Source Configuration includes several parameters to specify all the
settings related to a specific configuration requirement for your system.
Source configurations can be used for different purposes:
• to switch between your different sources. For example: one Blu-ray player, one Network player and a Digital TV.
• to switch between different outputs. For example: a pair of hi-fi loudspeakers and a 5.1 home cinema setup.
• to switch between sources and outputs simultaneously. For example: play a vinyl record on the hi-fi loudspeak-
ers and a blu-ray disc on the 5.1 home cinema system.
• to recall different processing settings such as acoustic optimization filters, decoding modes or bass manage-
ment modes.
In order to change one of the parameters of the selected source configuration, click on the corresponding arrow:
Figure 36: Editing a source configuration
The following settings can be configured for each of your Source Configurations:
• Input Connectors: select the rear panel input(s) to which your source is connected.
• Clock:
• Default: the clock will run in master mode for analog inputs, in slave mode for digital inputs, and in master
mode for the network input.
• Mast. XkHz: set the clock to different master clock sampling rates (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz or 96
kHz).
• Sl. WC: set the clock to slave mode.
• Output Connectors : select the outputs that you want to use to play this source:
• AES 1-8: analog outputs 1-32 ( depending upon your configuration ) and AES outputs 1-8 are active
simultaneously;
• AML: Audio Multi Link is active;
• HDMI: HDMI outputs 1 & 2 are active simultaneously;
• AES OLD 1-
16
: old routing used in the prerelease models. Do not use.
• Digital Input Data:
• Auto-detect: automatically detect whether the input is PCM or bit-stream;
• Force PCM Audio: force the PCM audio format;
• Force Bitstream Data: force the bitstream format to let the Altitude
16
decode the signal from the player.
• Channels : On non-HDMI source, you can select the channels you want to play
• L,R