Trinnov Audio ALTITUDE 16, User Manual

Page: 89 / 164

89
Altitude
16
_ USER MANUAL
6.5.3.1 _SET FILTERS
As shown below, this first section is divided in 3 different groups of settings:
• Low Pass – Sub(s) : These settings will delimit the cutoff frequency under which the signal from the channel
will be redirected and played by the subwoffer(s). You can here select the type of filter (Linkwitz-Riley, Bessel
or Butterworth), the cutoff frequency and the slope use by this filter. These settings are only apply to the signal
redirected to the subwoofer(s).
• Extra settings for sub(s) : These additionnal settings give the possibility to invert the polarity and adjust the
gain of the signal redirected to the subwoofer(s). These settings are only apply to the signal redirected to the
subwoofer(s).
• High Pass – Satellites : This section will delemit the low-end cutoff frequency of the signal send to the satellites.
You can here select the type of filter (Linkwitz-Riley, Bessel or Butterworth), the cutoff frequency and the slope
use by this filter. These settings are apply to the signal redirected to the Satellites.
6.5.3.2 _APPLY TO SELECTED SPEAKERS
The second section is here to define the group of speakers on which the filters will be applied. The speak-
ers, or satellites, are only concerned by the High Pass filter. The speaker selection is done by checking the
box on the left side of each speaker’s name.
Two buttons are in the Top right corner of this second section:
• Unselect all: Clicking on this button unselects every speaker;
• Select all: Clicking on this speaker selects every speaker.
6.5.4 _INDIVIDUAL SETUP MENU
6.5.4.1 _REGULAR BASS MANAGEMENT
The settings provided are similar to the Quick Setup menu but are adjustable on each speaker individually.
Each speaker has the following parameters:
• The activation of each sub by checking the Active box (which recalculates the attenuation accordingly): The
bass-managed signal will be redirected to the selected subwoofer(s);
• Gain and Polarity : These additionnal settings provides the option to invert the polarity and adjust the gain of
the signal redirected to the subwoofer(s). These settings are only applies to the signal redirected to the subwoof-
er(s), the signal going to the speaker remains unchanged;
• Low Pass – Sub(s) : These settings will delimit the cutoff frequency below which the signal from the channel