Trinnov Audio ALTITUDE 16, User Manual

Page: 156 / 164

156
9.5.8 _COMPUTE THE OPTIMIZATION FILTERS
After the calibration is successfully completed, the Top Bar indicates NOT READY, which means no sound
can go through the processor until the optimization filters are computed.
To compute the optimization filters for your
speaker measurements:
• Go to the Optimizer Settings/Calibration
page;
• Press the Compute button to start the calcu-
lation of the compensation filters. This will also
create the Optimizer graphs
!
NOTE:
• The top bar will display a gear wheel icon and a graph icon during computation.
• An onscreen message notifies the end of the computation.
• The speaker icon indicates that the Optimizer is ready.
• Computation time varies depending on the number of speakers in the system and on the Optimizer parameters.
!
IMPORTANT NOTE:
• Once the speaker system has been calibrated, every change can be applied through recalculation of the filters by pressing
the Compute button.
• Performing new measurements is not required unless:
o Speakers/Furniture/listening positions change in the room;
o the active crossover filters are modified;
o The number of speakers is modified;
o The channel order is modified.
9.5.9 _SAVE THE PRESET
Last but not least, be sure to save the preset to make sure all your preferred measurements and computed
filters are not lost.