Trinnov Audio ALTITUDE 16, User Manual

Page: 83 / 164

83
Altitude
16
_ USER MANUAL
6.4.13.1 _EXAMPLE OF AN ARRAY OF SPEAKERS
Below is an example of a specific speaker layout designed to array some channels:
In the example above, please pay attention to Left Wide and Right Wide speakers:
• For Dolby Atmos content, Left and Right Wide speakers will play natively as they natively existing in the codec;
For Dolby Legacy content, Left and Right Wide speakers will play Ls and Rs channel, simultaneously with Left
and Right surround speakers;
• For Auro 3D content, Lw and Rw does not exist natively. In this configuration Left and Right Wide speakers
will play Ls and Rs channels simultaneously with Left and Right Surround speakers;
• For DTS:X content, Left and Right Wide speakers will play Lss and Rss channel simultaneously with Left and
Right surround speakers;
• For DTS Legacy content, they will play Lss and Rss channel simultaneously with Left and Right surround
speakers;
6.4.13.2 _ADJUST THE GAIN
As you decide to array some speakers, it may be needed to adjust the gain of each speakers accordingly to
each decoder. It is possible to do it speaker by speaker, or to select a group of speakers to apply the same
gain adjustment.
To access to the speaker’s gain control panel, click on the Set Gain button in the
Speaker/Room setup tool. Instead of the channel assignation, the gain control will
be displayed.
The screen below displays the Set Gain control panel. Each channel assigned from each speakers has a value (de-
fault: 0) surrounded by – and + buttons. Use those buttons to adjust the gain in 1dB increments.
By clicking on a value, you also can manually enter a gain. In this case, a virtual numerical keyboard is displayed;