Trinnov Audio ALTITUDE 16, User Manual

Page: 44 / 164

44
While the system starts, the front panel screen displays the following image.
Figure 29: Front panel startup image
To shut the Altitude
16
down, press the front panel power button once. The front panel screen will then display the
following image until complete shutdown.
Figure 30: Front panel shut down image
!
NOTE: It is not recommended to cut the AC Power via the main power switch on the rear panel, as the system saves several “last-used” settings
while shutting-down.
VOLUME CONTROL SOURCE SELECTION PRESET SELECTION
• Turning the Volume Control knob to
the right or left will respectively turn the
volume up or down.
• Push the
Mute button to mute all audio
outputs of the Altitude
16
.
There are two methods to select sources
from the front-panel on the Altitude
16
:
• Turn the source selection knob to scroll
through sources and push the select
button.
• Use one of the
direct selection buttons to
choose among the first four sources (also
available on the remote control).
In order to select a preset through the
front-panel menus:
• Push the
Menu button, scroll until
Presets and push the Select button.
• Select the required preset using the
Source Selection Knob and push the
Select button.
!
NOTE: With factory settings, the
last-used source is recalled on
start-up.