Trinnov Audio ALTITUDE 16 User Manual Download Page 39

Page: 39 / 164

Altitude

_ USER MANUAL

AUDIO

CONTROL

Media server

& controler

Altitude

UPnP Network with a device used as server and controller

3.3 _RECOMMENDED UPNP SOFTWARES

The Alititude

is a UPnP renderer. Unlike a UPnP player, the Alititude

cannot be used to browse a library,

create playlists and control audio playback.

That’s why we have established a shortlist of UPnP third-part software optimized for audio.

JRiver

MediaCenter

These software has been selected, tested and qualified based on the following requirements.

UPnP server and controller

24 bits 192 playback

Bit Perfect Streaming

WAVE AIFF FLAC OFF support

Album cover art display

User-friendly graphical user interface

JRiver

MediaCenter (www.jriver.com)

JRiver Media Center is a comprehensive media player and UPnP platform that can be used as both server and con-

troller.

This software is therefore well-suited to the Altitude

JRiver Media Center is a commercial software available for PC and Mac.

DOWNLOAD >

www.jriver.com/download.html

Server

Controller

Summary of Contents for ALTITUDE 16





































































































































































Search results

Summary of Contents for ALTITUDE 16

Reviews:

Brands by name

Popular brands

Trinnov Audio ALTITUDE 16, User Manual

Search results

Summary of Contents for ALTITUDE 16

Reviews:

Brands by name

Popular brands