12
!
IMPORTANT NOTE:Please note that the Altitude16 is delivered with a fuse for 110 VAC. If you are located in a country that
use 230 VAC please change the fuse before any utilisation of the Altitude16.
1.1 _ABOUT THIS GUIDE
This guide includes the most important information you need in order to use and setup the Altitude
16
in
your home theatre system. From the most frequent daily operations to advanced calibration and optimi-
zation functionality, this document will guide you through every step of the task you wish to accomplish.
This guide is organized in the following parts:
PART I: GETTING STARTED WITH THE ALTITUDE
16
:
-
Introduction:
unpacking the Altitude
16
and an overview of the hardware and the software.
-
Network Setup:
setting up a network to start using the software.
PART II: USING THE ALTITUDE
16
ON A DAILY BASIS IN YOUR HOME THEATER:
- Daily Operations:
Explains how to perform simple operations such as power-on/power-off, volume control, source
selection, preset selection and decoder settings via the front panel, with the IR remote control or through the software
user interface.
- Basic Settings:
Explains how to name and configure your sources, how to switch on/off main optimization and remap-
ping options, how to manage presets, and how to backup/restore presets to/from a USB memory stick.
PART III: INTEGRATING THE ALTITUDE
16
IN YOUR HOME THEATRE SYSTEM:
Overview of the setup procedure:
A summary of the main steps you must follow in order to successfully integrate
the Altitude16.
Essential tools and settings:
Provides important information about the software tools and settings you need to
know before starting the setup process.
Specify the Speaker Layout:
How to provide the Altitude16 with all the information about your set of speakers.
This information is required for the automatic calibration of the speakers in the room.
Specify an Array of Speakers:
Provides information to setup an array of speakers.
Decoder/Upmixer Settings:
Provides necessary information on the different decoders supported, their upmixer
and the settings available.
Getting ready for calibration:
Provides important tips and recommendations you need to know before running the
calibration procedure, including tips about microphone placement.
Optional:
Calibrate the Active Crossovers: Explains the setup procedure for multi-amplified speakers using the
Altitude16’s intelligent crossover calibration tool;
Calibrate the Speakers in the Room:
Explains the calibration process for the speaker system and how to compute
the optimization filters.
Setup Bass Management:
Explains the advanced bass management options supported by the Altitude16.
Summary of Contents for ALTITUDE 16
Page 1: ...HIGH END TRINNOV ALTITUDE16 USER MANUAL v 1 0...
Page 2: ......
Page 11: ...11 Altitude16 _ USER MANUAL...
Page 164: ...Thank you for your attention Please enjoy your Sound...
