Trinnov Audio ALTITUDE 16, User Manual

Page: 161 / 164

161
Altitude
16
_ USER MANUAL
DECODERS
INPUT LEVELS
BASS MANAGEMENT
SPEAKERS REMAPPING
OPTIMIZER
OUTPUTS LEVELS
ACTIVE CROSSOVERS
PARAMETRIC EQ
12.4.2 _SETUP PROCESS AND FILTERS CALCULATION
Active-Crossovers are set up first following a semi-automatic calibration procedure.
The Optimizer’s filters calculation is made from the speaker measurement.
Remapping filters are applied based on the source’s input format and loudspeaker position measured during the
Optimizer Calibration, as soon as one of the remapping mode is enabled manually.
Bass management crossover filters are applied after and regardless of the loudspeakers calibration. The crossover
frequencies and bass management mode can therefore be modified after calibration.
12.5 _3D SPEAKER PLACEMENT
RECOMMENDATIONS
For detailed information about speaker placement recommendations, please refer to the following documents:
• Auro-3D Home Theatre Setup Installation Guidelines, available from Auro Technologies.
http://www.auro-3d.com/wp-content/uploads/documents/Auro-3D-Home-Theater-Setup-Guidelines_lores.pdf
• Dolby Atmos Home Theatre Installation Guidelines, available from Dolby:
http://www.dolby.com/us/en/technologies/dolby-atmos/dolby-atmos-home-theater-installation-guidelines.pdf
!
NOTE: As of January 20
16
, the DTS X Home Theatre Installation Guidelines are not yet available.
12.6 _3D MEASUREMENT MICROPHONE
The purpose of the calibration microphone is to measure the characteristics of the loudspeaker and their
layout in the room.
For each loudspeaker, the Optimizer gathers the following information:
• full 3D position
• amplitude response
• phase response