4.11
TRICOR Systems Inc.
4.4
Temperature Control
Figure 4.4 Configuration Application Temperature Tab
The
Temperature
tab displays the current temperatures of the cooler well and
the heated temperature probe. It also displays information about the cooler
assembly.
For both the heater and the cooler there is a group on the display which shows
(from left to right) the requested temperature, the current measured temperature,
the status of the temperature control loop and a button to toggle control screen
on and off.
Normally the control loop toggle buttons should not be pressed. The main
software of the 225 may not restart the control if a test is started. If you use
these buttons to toggle control off, TRICOR recommends that you turn off the
Model 225 before making any chocolate test.
The
Features
group has two check boxes which indicate the availability of
optional features. These are indicators only; they can not be clicked on to
change the state of the feature. Both of these features are used from
experimental testing and not available for normal use. The
Change Ref
Temperatures
option being disabled also disables the
Cooler Ref
and
Heater
Ref
buttons.
