3.16
TRICOR Systems Inc.
3.5.9 Run Time (Cont'd)
Press the
Select
button to select this menu group. Use the scroll buttons to
change the Run Time
Run Time Menu
5:00
To accept the newly entered value, press the
Select
button. If you decide not to
change the value, press the
Cancel
button to return without making the change.
In both cases the Top Menu Selection display will show again. To return to the
ready to test screen press the
Cancel
button.
3.5.10 Plot Baseline Temp
The Plot Baseline Temperature is an option that must be purchased when
ordering the Model 225. It is only available as an option if you also purchase the
external printer or TMDAS option. If you do not have this option, selecting this
menu group will cause a warning message indicating that the feature is not
available. This menu group allows the baseline of the printed graph to be
adjusted. This option is necessary with some products where the inflection point
may occur above or below the range of the normal printout.
To change the baseline temperature, press the
Select
button from the ready to
test screen. Use the scroll buttons to choose the Plot Baseline Temp group.
Top Menu Selection
8 - Plot Baseline Temp
Press the
Select
button to select this menu group. Use the scroll buttons to
change the temperature. Each press of the scroll buttons increment/decrements
the temperature 1°C or 2°F (even numbers).
Plot Baseline Temp Menu
58.0
To accept the newly entered value, press the
Select
button. If you decide not to
change the value, press the
Cancel
button to return without making the change.
In both cases the Top Menu Selection display will show again. To return to the
ready to test screen press the
Cancel
button.
