3.9
TRICOR Systems Inc.
3.5.2 User ID (Cont'd)
To enter the User ID, press the
Select
button from the ready to test screen. Use
the scroll buttons to choose the User ID group.
Top Menu Selection
0 - User ID
Press the
Select
button to select this menu group. Use the scroll buttons to
change the ID setting. The minimum value is 0 and the maximum is 199.
Setting the ID to 0 will disable the User ID feature, and the ID value will not be
printed.
User ID Menu
User ID = 199
To accept the newly entered value, press the
Select
button. If you decide not to
change the value, press the
Cancel
button to return without making the change.
In both cases the Top Menu Selection display will show again. To return to the
ready to test screen press the
Cancel
button.
3.5.3 Print Result Data
The Model 225 saves previous test results so that they can be recalled and
printed. These results can be sent to the internal printer or the external printer if
this optional feature is available. The TMDAS software (optional) also
substitutes for the external printer.
The standard Model 225 retains only the last 5 test samples. The unit can be
ordered with an optional multi-store capability. The number of stored results is a
function of the length of the test time. Standard 5 minute runs allow
approximately 198 sample runs. The 9:55 length run can store only about 112
runs. Short 3 minute runs allow over 280 runs to be saved. The variable run time
feature is an option.
To print a previous test sample, press the
Select
button from the ready to test
screen. In the menu mode, use the scroll buttons to choose the Print Result Data
group.
