3.21
TRICOR Systems Inc.
3.5.14 Cooler Set Point (Cont'd)
WARNING
Changing the cooler set point will effect the calibration of
the Model 225. TRICOR uses the set point to obtain
uniformity between its temper meter lines. Changing the
temperature voids any calibration certification provided by
TRICOR. This feature is intended for advanced users only.
3.5.15 Heater Set Point
The Heater Set Point Temperature is an option that must be purchased when
ordering the Model 225. If you do not have this option, selecting this menu group
will cause a warning message indicating that the feature is not available. This
menu group allows the heater temperature to be adjusted.
Top Menu Selection
13 - Heater Set Point
Press the
Select
button to select this menu group. Use the scroll buttons to
change the temperature. The temperature can be changed in 0.1 degree steps.
Heater Set Point Menu
78.0
To accept the newly entered value, press the
Select
button. If you decide not to
change the value, press the
Cancel
button to return without making the change.
In both cases the Top Menu Selection display will show again. To return to the
ready to test screen press the
Cancel
button.
WARNING
Changing the heater set point will effect the calibration of
the Model 225. TRICOR uses the set point to obtain
uniformity between its temper meter lines. Changing the
temperature voids any calibration certification provided by
TRICOR. This feature is intended for advanced users only.
