User Guide
TransCore Proprietary
7-22
530 Display RF0 Filter Status
Command
!530
displays the parameter set for the RF input, including the selected
unique ID code criteria (!410N Select Unique ID Code Criteria) and the valid ID code criteria
(see
!420N
Select Valid ID Code Criteria).
Reader message:
RF0S U<0 to 4> V<0 to 3>
where
U0
One ID separation (factory default)
U1
Two ID separations
U2
Three ID separations
U3
Four ID separations
U4
Transmit all IDs
V0
Valid ID code criteria of one acquisition
V1
Valid ID code criteria of two acquisitions
V2
Valid ID code criteria of three acquisitions
V3
Valid ID code criteria of four acquisitions
For example, if factory default settings are assigned, the reader message is
RF0S U0 V0
which means separation of one ID for uniqueness filtering and a valid ID code criteria of
one acquisition.
532 Display Wiegand Mode Status
Command
!532
displays the Wiegand mode status as either enabled or disabled.
Reader message:
TOF <0 to 1>
where
0
Wiegand mode disabled
1
Wiegand mode enabled
Summary of Contents for 1422E
