TransCore 1422E, User Manual

Page: 56 / 102

AI1422E Reader
TransCore Proprietary 7-7
21 Set Date
Command
!21
sets the date. Enter the date in the proper format: two-digit decimal entries
with no spaces between characters and using forward slashes “/” as delimiters. The entry
format is as follows:
21MM/DD/YY
where
MM
represents the month (01 to 12).
DD represents the day (01 to 31).
YY represents the last two digits of the year (00 to 99).
- is the date delimiter.
Reader response:
Done
22 Display Time and Date
Command
!22
displays the reader’s current time and date. One space separates the
time and the date output.
Reader message:
HH:MM:SS.hh MM/DD/YY
where
HH
represents hours.
MM represents minutes.
SS represents seconds.
hh represents hundredths of seconds.
: is the time delimiter.
MM represents the month.
DD represents the day.
YY represents the last two digits of the year.
- is the date delimiter.
Append Information — Command Group 3
Group 3 commands append useful information to reader transmissions, such as IDs, error
messages, and sensor input reports. Auxiliary information such as reader number, antenna
number (or manual entry code), number of times the previous tag was read, and sensor
input status can be appended to the ID using the Group 3 commands.
30N Append Time and Date Selection
Command
!30N
selects the option of appending the time and date to transmitted IDs,