TransCore 1422E, User Manual

Page: 101 / 102

AI1422E Reader
TransCore Proprietary C-1
Appendix C
Lantronix® Ethernet Module Configuration
The AI1422E incorporates an Embedded Ethernet to Serial server from Lantronix ®. In order
to configure the Ethernet to Serial server, Lantronix software is required. The user guide for
the Lantronix ® XPort ® Embedded Serial-to-Ethernet server can be found at www.
lantronix.com/wp-content/uploads/pdf/XPort-Direct-Plus_UG.pdf.
The easiest way to connect to the AI1422E is by using the Lantronix ® CPR (Com Port
Redirector) software, which will allow connecting directly to the AI1422E through the
Ethernet Interface from a Windows computer. The Lantronix ® CPR software can be found
at http://ltxfaq.custhelp.com/app/answers/detail/a_id/928 and documentation of this
software can be found in the Lantronix ® CPR Quick Start Guide, located at www.lantronix.
com/wp-content/uploads/pdf/Com-Port-Redirector_QS.pdf
Other methods of communicating through the Lantronix ® module exist. Contact Lantronix ®
with questions.
Embedded Device: Lantronix ® XPort ® Embedded Serial-to-Ethernet
Lantronix ® Technical Support
Hours: 6:00am – 5:00pm Pacific Time
Mon. – Fri. (excluding holidays)
Tel: (800) 422-7044 (US Only)
Tel: (949) 453-7198