29
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
6.2.10
Disable
Command:
Disable,on/off,
password
Alias:
(none)
Parameters:
on/off
password
– optional and only needed when disabling the vehicle
Description:
Toggles the vehicle immobilization (disables/enables the ignition from
starting).
Related Cmds:
none
Security:
Owner
Message Format:
Command Response
Notes:
1.
When disabling, if the ignition is currently on then the command will not take effect for 45
seconds after the ignition is turned off and the user should be notified after the delay. If
the ignition is off the command is executed immediately.
2.
Ignition detection must be connected.
3.
The output line to the immobilizer relay is only powered when starting the car and
DISABLE has not been set.
4.
To reset this the owner would send the DISABLE,off command to allow the vehicle to be
started.
Errors:
1.
Parameter Error
Examples:
When enabled and the ignition is off
DISABLE,on,
123456
Tramigo: Disable, Vehicle ignition disabled, 09:25 Jan 14
When enabled and ignition is on
DISABLE,on,123456
Tramigo: Disable, Vehicle ignition will be disabled 45 seconds after the ignition is
turned off, 09:25 Jan 14
Later when the command is executed
Tramigo: Disable, vehicle ignition disabled, 09:45 Jan 14
DISABLE,off
Tramigo: Disable, vehicle ignition enabled, 09:45 Jan 14
