21
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
6.2.2
AddPlace
Command:
AddPlace,placeName,
latitude,longitude,radius
Alias:
AP
Parameters:
placeName – required. 40 characters maximum
,
no commas
Latitiude
– optional.
Longitude
– optional.
Radius
– optional
Description:
Adds a place to the user location directory.
Related Cmds:
DelPlace
Security:
Friend
Message Format:
Command Response
Notes:
1.
The current coordinates of the unit are used, so it’s best if the unit is parked.
2.
Place names must be unique. Adding a place with an existing name overwrites the existing
coordinates. Only the first part of the location name is used.
3.
Place names are not case sensitive for lookup purposes but will display in the case entered
by the user.
4.
Special place name all is reserved.
5.
Commas and other invalid characters are substituted with blanks. Extra blanks are
removed.
6.
Once a place is added it will appear in location messages when it’s the closest point to the
vehicle.
7.
The user locations are separate from the system locations that were pre-loaded to the unit.
This allows reset of only the User added locations.
8.
Latitude and longitude are in decimal degree format up to 5 decimal places. Radius is in
decimal format up to 2 decimal places. Exceeding characters will be rounded up.
9.
You can add up hundreds of your own locations to the T23 Series. If you need to add more
and then contact Tramigo Support.
Errors:
1.
Parameter Error
2.
List Full Error
Examples:
ADDPLACE,Home
Tramigo: AddPlace, place Home added to the user locations, 09:25 Jan 14
ADDPLACE,Office,14.55952,120.99168,1.00
Tramigo: AddPlace, place office 14.55952 120.99168 1.00 added to the user locations,
09:25 Jan 14
