30
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
6.2.11
Find
NEW
Command:
Find, off/near/time/xtime/daily/weekly,ydistance,non-triptime,angle
Alias:
F, where, location, blank
Parameters:
near
– optional. Also returns the next 3 nearest places (First part of the
location name only)
time
– optional. Creates automatic FIND reports.
xTime
– optional. Creates automatic FIND reports when on trip and is
followed by automatic FIND by xDistance.
off
– optional. Turns off automatic time FIND reports.
distance
– optional. Creates automatic FIND reports.
non-triptime
– optional. Sends automatic FIND reports when not in trip
mode
angle
- Sends automatic FIND reports if vehicle angle change more than
the angle set. Minimum is 20. Maximum is 180.
Description:
Returns the state and location of the vehicle.
Related Cmds:
COORD, METRIC
Security:
Guest
Message Format:
Location
Notes:
1.
A blank SMS will also issue the find command.
2.
Once the first GPS fix is received by the unit the FIND will always return a valid position.
Until then the string no GPS lock is returned and the time is set to 00:00 Jan 1.
3.
If the location unknown position is displayed then there is a problem with the location
directory.
Contact support
.
4.
Old GPS position is displayed when the last GPS fix is over 3 minutes old.
5.
Date and time on location messages is the time of the last valid GPS position.
6.
Location will not change when IGNITION is off unless a TRIP is started or the vehicle has
moved more than 300m.
7.
To determine presence:
a.
Parked – vehicle is not in a Trip and not moving
b.
Moving – vehicle is in a Trip
c.
Stopped – vehicle is in a Trip and not moving
8.
Automatic timed reports can be from 1 to 10080 minutes or daily or weekly. When in sleep
mode the report will be sent when the unit wakes up next.
9.
Automatic distance reports can be from 0.5 km to 20,000km. Due to GPS availability the
actual distance can vary from report to report – this is normal.
10.
When in sleep mode all automatic reports will be sent only when the unit wakes up next.
11.
Automatic reports are only sent to user who requested the report. Each user can set their
own interval. Automatic reports should only be used by a few users otherwise the SMS may
start to queue (GSM light flashing).
12.
Advanced command F,near,4 will return nearest 4 places. Max is 5. Default is 3.
13.
Automatic FIND for trip mode and non-trip can be set with FIND,xTime,yDistance,non-
triptime, angle
a.
xtime is the interval for T23 Fleet automatic find when on trip mode.
b.
non-triptime automatically takes place to send automatic FIND when T23 Fleet was
not on trip mode. This can only be recognized when trip mode and distance value
are present upon sending the command.
14.
Enable report time stamp with seconds with command:
a.
Set,ShowTime,2
Errors:
1.
Parameter Error
Examples:
