Tramigo T23 Series, User Manual

Page: 72 / 77

72
T23 Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
info@tramigo.com
PanicButtonHoldTime 2 1 3600 s Required duration of panic button press
PowerButtonHoldTime 2 1 3600 s Required duration of power button press
ReArmDelay 30 1 900 seconds
Time interval before Alarm is re-armed after pressing
SOS button.
RequireOwnerConfirmation 0 0 1 boolean
If set on the new owner is requested to confirm but
sending owner,yes command.
SensorOff 1 0 1 boolean Enables sensor off reporting
SensorOn 1 0 1 boolean Enables sensor on reporting
ShowTime 1 0 1 boolean Enable time stamps at end of reports
Sleep 1 0 1 boolean Enable sleep mode
Sleep1GsmOff 0 0 1 boolean GSM turned off in sleep mode 1
Sleep1OffTime 55 1 9999 min Off time in sleep mode 1
Sleep1OnTime 5 1 9999 min On time in sleep mode 1
Sleep1Repeats 6 1 9999 Number of repeats in sleep mode 1
Sleep2GsmOff 1 0 1 boolean GSM turned off in sleep mode 2
Sleep2OffTime 55 1 9999 min Off time in sleep mode 2
Sleep2OnTime 5 1 9999 min On time in sleep mode 2
Sleep2Repeats 120 1 9999 Number of repeats in sleep mode 2
Sleep3GsmOff 1 0 1 boolean GSM turned off in sleep mode 3
Sleep3OffTime 1435 1 9999 min Off time in sleep mode 3
Sleep3OnTime 5 1 9999 min On time in sleep mode 3
Sleep3Repeats 0 1 9999 Number of repeats in sleep mode 3
SleepTimeoutIgnition 60 1 9999 min Sleep timeout from ignition switched off
SleepTimeoutWake 10 1 9999 min Sleep timeout from the last wake trigger
SMSRetriesTotal 15 1 99 number
Number of times the T23 Sries will attempt to resend a
SMS.
SMSSendTimeout 1 9999 min timeout for sending sms
SOSGPIO 0 0 1 boolean
External GPIO input used as a combined SOS/HF
button instead of ignition input
SOSMinPressTime 0 0 999 ms HF button hold time for SOS detection (for GPIO input)
SOSReportToFriend 0 0 1 boolean
Turn on to include users with Friend authority to SOS
reports.
SpeedLimitFilter 50 1 999 km/h
After a speed limit report, the speed must drop this
much below the limit until more reports are sent
TripEndTime 15 1 999 min Trip end time
TripStart 1 0 1 boolean Trip start reports enabled/disabled
TripStartDelay 60 1 999 seconds
Minimum time for a trip report. Trip reports shorter than
this time are ignored
TripStartLockDistance 500 1 9999 m
Distance limit to use previous trip end location as the
new start location
UseIgnition 1 0 1 boolean
Use ignition input (GPIO wired or shock) in vehicle
state handling
VoltageShutdown 3500 3500 5000 mV Low voltage shutdown limit
VoltageWarning 3650 3501 5000 mV Low voltage warning limit
VoltageWarningFilter 100
optimum
value
set mV
After a low voltage report, the voltage must rise this
much above the limit until more reports are sent
WakeOnIgnition 1 0 1 boolean Wake up from sleep on ignition input