66
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
6.2.45
Zone
Command:
Zone,
distance/on/off/userLocations,placeName/in/out/both/off
Alias:
Z
Parameters:
on/off
– optional. Turn zone reporting on or off
distance –
optional. Distance is in the units used by the system. Default is
1. Minimum is 0.1 maximum is 999
userLocations
– optional. Sends a zone report when a user location has
been entered/exited
placeName
– optional. Name of the location. Default is the current location
of the vehicle
in/out/both/off
– optional. Used with parameter
userLocations
Description:
Turns Zone reporting on and off. Notifies user when the vehicle is entering
or leaving an area. The area is defined by a circle with a radius defined by
the distance from the place name.
Related Cmds:
AddPlace
Security:
Friend
Message Format:
Command Response
Errors:
1.
Parameter Error
2.
Lookup Error
Notes:
1.
Zone crossing is reported whenever the unit crosses a circle with radius of
distance
from
the
placename.
2.
Zone reports will be only be issued when the unit has a GPS fix and the unit is in a Moving
or Stopped state. If the unit crosses the zone without a fix, then the report will be delayed.
3.
Once a crossing is detected there is a 10 minute delay between reports to avoid excessive
reporting.
4.
Adding a new Zone will replace the current active Zone.
5.
The user can enter a partial string for the placeName, and if a unique name is not found
then the system will select the closest placeName. Lookup is only done on the first name
field of the location. User locations are also searched.
6.
Zone reporting works best in fully installed units that have ignition sensing connected.
7.
User locations are places added with command ADDPLACE. They can be set as zones with
parameters in/out/both/off
a.
In: sends a report when the user location has been entered
b.
Out: sends a report when the user location has been exited
c.
Both: sends a report when user location has been entered/exited
d.
Off: turns the user added locations zone reporting off
Examples:
ZONE
Tramigo: Zone, Vehicle will report when 1 km from current Location, 1.1 km W of
Glorietta Mall, 09:25 Jan 14
ZONE,5,home
Tramigo: Zone, Vehicle will report when 5 km from, Home, 09:25 Jan 14
When the Zone crossing is detected the following report is sent to the user:
Tramigo: Zone crossing detected, moving, 0.11 km NE of Berjaya Times Square,Kuala
Lumpur,KL,MY, SW with speed 33 km/h, 09:25 Jan 14
