56
T23
Series User Manual
For more information about Tramigo tracking products, please visit www.tramigo.com. For distributor, re-seller and
partnership opportunities, email
6.2.35
Speed
Command:
Speed,
speedLimit/
on/off
Alias:
S
Parameters:
on/off – Turn speed limit on or off
speedLimit
–
optional – Value from 50 to 200 kmh, default is 120
Description:
Turns on and off speed reporting for the user.
Related Cmds:
none
Security:
Friend
Message Format:
Command Response
Notes:
1.
Speed report occurs immediately when exceeding the speed limit set. Maximum speed is
not reported but can be found in the Trip report.
2.
Report will not occur again until the speed limit is exceeded after the speed has decreased
by 50 km to prevent excessive reports – This default is set with Set,SpeedLimitFilter,xx –
where xx is km/mi. To set the speed limit below 50 then set this parameter otherwise only
1 speed report will be sent. Minimum is 10.
3.
MaxSpeed system parameter is set at 200, so if you want to set the speed limit over 200
then you must Set,MaxSpeed,xxx to the value you want – maximum is 360.
4.
Speed limit is set per user.
Errors:
1.
Parameter Error
Examples:
SPEED,110
Tramigo: Speed, speed limit 110 km/h, reporting is turned on, 09:25 Jan 14
When the vehicle exceeds 110 kmh:
Tramigo: Speed limit detected, moving, 0.22 km NE of Bangkok City Hall, Phranakhon,
Bangkok, TH, SW with speed 115 km/h, 09:25 Jan 14
