background image

CONTENTS

PRO-SERIES ALARM SYSTEM

MODEL 5002PRO

INSTALLATION GUIDE

OWNER’S GUIDE

System Features ......................................2

System Components ....................................2

Required Tools .......................................2

Technical Assistance .................................2

Before You Begin .....................................3

Precautions ..........................................3

Testing Your Wires ...................................3

Making Wiring Connections ..........................3-5

Locating & Making Connections ......................5-7

Installation Instruction ...........................7-9

Wiring Diagram ......................................10

Operating Instructions ...........................11-12

Programming Instructions .........................12-13

Technical Assistance

All tech personnel are expertly qualified to answer any technical questions.

Technicians are available Monday through Friday from 9:00 a.m. until 8:00 p.m. and Saturday 10:00 a.m. until 4:00 p.m.

Address

288 Canton Avenue • Wintersville, Ohio 43953

Telephone

Phone:  740-264-4710 • 800-878-8007 • Fax: 740-264-7306

Downloaded from:

 http://www.guardianalarms.net

Summary of Contents for 5002PRO















Reviews: