10. Attach a protective cover onto each bracket. The
covers simply snap into place at the sides of the
brackets.
54-0208-01
2.15
Installing the Antenna
Securing Brackets to the Roof (Additional Spacers Shown)
The TORX mounting screws are prepared
with a thread-locking patch. If these screws
are removed after their initial installation,
the patch’s locking capacity will be
degraded. Therefore, before reusing the
mounting screws, you
MUST
apply
threadlocker (Loctite 425) to the screw
threads to avoid a potentially dangerous
condition. Failure to apply threadlocker to
the screw threads can result in unsecure
mounting.
WARNING!
Attaching the Cover
Two different sizes of covers are provided in
the kitpack. Install the two larger covers on
the rear brackets and the smaller covers on
the front brackets.