54-0208-01
3.10
TracVision A5 Installation Guide
Option 2 - S-Video Jack
(best picture quality)
If the vehicle’s entertainment system has a high-
quality S-Video jack, follow the steps below.
1.
Connect an S-Video cable
(not supplied)
to the
“S-Video” jack on the receiver’s rear panel.
2.
Connect the other end of the S-Video cable to the
entertainment system
’s S-Video input.
3.
Connect two of the supplied audio/video cables
(with the red and white connectors) to the
“Audio R” and “Audio L” jacks on the receiver’s
rear panel.
4.
Connect the other ends of the audio cables to the
entertainment system
’s audio inputs.
If the system
has only one audio input jack, connect the audio cable
that is connected to the receiver’s “Audio L” jack.
Option 3 - RF Coaxial Connector
(good picture quality)
If the entertainment system has just an RF (coaxial)
connector and is equipped with a built-in TV tuner,
follow the steps below.
1.
Connect an RF cable
(not supplied)
to the “Out to
TV Tuner” jack on the receiver’s rear panel.
2.
Connect the other end of the RF cable to the
entertainment system
’s VHF/UHF or RF input.
