Toyota OM30875U Manual Download Page 1 | Manualshive

Page: 1 / 144

background image

1

Introduction

Thank you for your purchase of the Navigation System. Please read
this manual carefully to ensure proper use. Keep this manual in your
vehicle at all times.

The Navigation System is one of the most technologically advanced

vehicle accessories ever developed. The system receives satellite sig-

nals from the Global Positioning System (GPS) operated by the U.S.

Department of Defense. Using these signals and other vehicle sen-

sors, the system indicates your present position and assists in locating

a desired destination.
The navigation system is designed to select efficient routes from your

present starting location to your destination. The system is also designed

to direct you to a destination that is unfamiliar to you in an efficient manner.

The system uses DENSO maps. The calculated routes may not be the

shortest nor the least traffic congested. Your own personal local knowl-

edge or “short cut” may at times be faster than the calculated routes.
The navigation system’s database includes about 75 Point of Interest

categories to allow you to easily select destinations such as restaurants

and banks. If a destination is not in the database, you can enter the street

address or a major intersection close to it and the system will guide you

there.
The system will provide both a visual map and audio instructions. The au-

dio instructions will announce the distance remaining and the direction to

turn in approaching an intersection. These voice instructions will help you

keep your eyes on the road and are timed to provide enough time to allow

you to maneuver, change lanes or slow down.

1
2
3
...
»

Summary of Contents for OM30875U

















































































































































Reviews:

No comments

Related manuals for OM30875U

Brand: Grundig Pages: 34

Brand: Rexing Pages: 18

Brand: Boss Audio Systems Pages: 4

Brand: Phonocar Pages: 56

ETV DVD 4549 LCD

Brand: AEG Pages: 70

Brand: AEG Pages: 66

Brand: AEG Pages: 54

Brand: AEG Pages: 62

Brand: AEG Pages: 65

Brand: Naxa Pages: 14

Brand: Toro Pages: 4

Brand: InCarTec Pages: 4

Brand: Gardena Pages: 20

Brand: LubriMist Pages: 152

Brand: Premier Pages: 36

Brand: Pyle Pages: 32

Brand: RCA Pages: 9

Brand: Phonocar Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands