Toyota Matrix 2003 User Manual Download Page 22

Page: 22 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

CAUTION

Keep the back door and glass hatch
closed while driving. This not only

keeps the luggage from being thrown

out but also prevents exhaust gases
from entering the vehicle.

NOTICE

To prevent damage to the back door
and glass hatch dampers, do not ap-

ply any force, paint or let any other

foreign matter on them.

OPENING THE GLASS HATCH WITH

THE KEY
Insert the key into the keyhole and turn

it fully clockwise (one step further than
the back door locking position).

The glass hatch can be opened with the

wireless remote control transmitter. See
“—Wireless remote control” on page 11 in

this section.

OPENING THE GLASS HATCH WITH

THE GLASS HATCH OPENER SWITCH
Push the glass hatch opener switch

when the vehicle is stopped.

CAUTION

Do not open the glass hatch while
the vehicle is moving.

Glass hatch

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands