Toyota Matrix 2003 User Manual Download Page 51

Page: 51 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

NOTICE

Do not perform any of the following
changes without consulting your

Toyota dealer. Such changes can

interfere with proper operation of the
SRS front airbag system in some

cases.

Installation of electronic devices
such as a mobile two

−

way radio,

cassette tape player or compact

disc player

Modification of the suspension sys-

tem

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to
the front end

Repairs made on or near the front
fenders, front end structure, con-

sole, steering column, steering

wheel or dashboard near the front
passenger airbag

This SRS front airbag system has a

service reminder indicator to inform the
driver of operating problems. If either of

the following conditions occurs, this

indicates a malfunction of the airbags.
Contact your Toyota dealer as soon as

possible to service the vehicle.

The light does not come on when the

ignition key is turned to the “ON” posi-

tion, or the light remains on.

The light comes on while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS front airbags have been in-

flated.

The front of the vehicle (shaded in the

illustration) was involved in an accident

that was not severe enough to cause
the SRS front airbags to inflate.

The pad section of the steering wheel
or front passenger airbag cover

(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands