Toyota Matrix 2003 User Manual Download Page 42

Page: 42 / 321

’03 MATRIX_U (L/O 0201)

2003 MY COROLLA MATRIX_U (OM12767U)

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the seat belt extender is not

twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and
buckle.

If the seat belt does not function
normally, immediately contact your

Toyota dealer. Do not use the seat

until the seat belt is fixed. It cannot
protect an adult occupant or your

child from injury.

The driver and front passenger’s seat

belt pretensioners are designed to be

activated in response to a severe fron-

tal impact.

When the airbag sensor detects the shock

of a severe frontal impact, the front seat
belts are quickly drawn back in by the

retractors so that the belts snugly restrain

the front seat occupants.
The front seat belt pretensioners are acti-

vated even with no passenger in the front
seat.

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the front seat belt pretensioners

are operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, side airbag sensors, driver’s seat

position sensor, driver’s seat belt buckle

switch, front seat belt pretensioner assem-
blies, inflators, warning light, interconnect-

ing wiring and power sources. (For details,

see “Service reminder indicators and
warning buzzers” on page 86 in Section

−

5.)

—Front seat belt

pretensioners

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands