Toyota Matrix 2003 User Manual Download Page 146

Page: 146 / 321

’03 MATRIX_U (L/O 0201)

142

2003 MY COROLLA MATRIX_U (OM12767U)

Air intake selector

Press the button to select the air source.

1. Recirculate—

Recirculates the air inside

the vehicle.

2. Fresh—

Draws outside air into the sys-

tem.

To prevent fogging up of the windshield,

the air intake mode may change automati-

cally to FRESH depending on the condi-
tion of the air conditioning system.

“A/C” button (on some models)

To turn on the air conditioning, press the

“A/C” button. The “A/C” button indicator
will come on. To turn the air conditioning

off, press the button again.

carownersmanual.net

Summary of Contents for Matrix 2003


































































































































































































































































































































Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands

Toyota Matrix 2003, User Manual

Search results

Summary of Contents for Matrix 2003

Reviews:

Related manuals for Matrix 2003

Brands by name

Popular brands